Container Yard Forklift 10 Ton Diesel CPCD100 3m Duplex Mast, CE, Port Terminal, CIF
TAVOL CPCD100 — 10,000 kg diesel forklift specified for container yards, port warehouses and CFS platforms. 3,000 mm 2-stage duplex mast, 4,150 mm turning radius, 2,800 mm wheelbase, 2,245 mm width, 1,520 mm forks on solid tyres, hydraulic fork positioner, FAW Wuxi Xichai CA6110 six-cylinder 85 kW engine with auto-hydraulic transmission. Works around containers and on loading platforms — not intended to drive inside a container (2,570 mm overhead guard height). MOQ 1 set · 5 days for stock machines · 24-month warranty · FOB / CIF.
Tavol CPCD100 diesel forklift is specified for container yards, port-adjacent warehouses and container freight stations: 10 tonnes at a 600 mm load centre, a 3 metre two-stage duplex mast, and a 4,150 mm turning radius on a 2,800 mm wheelbase.
Production is in-house at our Tai'an factory. Standard builds ship in 5 days, customised builds in about 15 working days, and OEM or ODM branding is accepted. Tell us the lane width and the stack pitch, and we quote the configuration rather than a generic model.
Overview
Working the lane between two block stacks? The CPCD100 is sized for it: 4,150 mm turning radius, 2,245 mm overall width, 13,850 kg of service weight holding 10 t at 3 m, and solid 9.00-20NHS tyres that survive quay surfaces and scrap-contaminated apron. An 85 kW FAW Wuxi Xichai CA6110 six-cylinder diesel drives through an auto-hydraulic transmission, so shuttle cycles across the apron do not depend on clutch technique.
One point worth stating plainly: with a 2,570 mm overhead guard this machine works around containers and on loading platforms — it is not built to drive inside a container. For in-container work we quote a different machine class.
At a glance
10,000 kg — rated capacity at a 600 mm load centre
3,000 mm — lift height, two-stage duplex mast
4,150 mm — minimum turning radius
2,800 mm — wheelbase
2,245 mm — overall width
15 / 20 km/h — travel speed, laden / unladen
Design highlights
01 — Turns inside the lane you already have
4,150 mm turning radius on a 2,800 mm wheelbase means the machine works the gap between block stacks without a three-point shunt.
02 — Three metres without a tall mast
Two-stage lift keeps the collapsed profile low, so the machine passes under shed roofs, gantry legs and dock canopies. Fewer chain and cylinder sets than a triplex mast also means fewer inspection points.
03 — Weight, not ballast
13,850 kg of service weight holds 10 t at full lift. No auxiliary counterweight to add, remove or certify.
04 — Solid tyres, hydraulic forks
9.00-20NHS solid tyres with 250 mm clearance, and a fork positioner that sets spread from the seat — pallet, frame and crate widths in the same shift without getting off the machine.
Component details
Four components decide how the machine behaves after a year of shifts. Captions are given in Chinese and English on the images.
Cushioned lift and tilt cylinders. The cylinders buffer the end of travel, so the mast stops without the jolt that shakes the load and the operator.
Large-bore hydraulic manifold. Large-diameter lines combined with load sensing and two-way confluence cut what the pump has to deliver on every working cycle. Wider steering angle. Steering axle geometry reduces the turning radius — the difference between a three-point shunt and one clean turn in a tight aisle.
Cast steel axle housing. Drum brake as standard, wet brake optional. The reinforced housing deflects less under load and is built dust-proof and water-proof. Load-adaptive gearbox. Output torque and speed follow the external load, absorbing the impact and vibration that would otherwise reach the driveline.
Console layout. Standard electro-hydraulic direction control, shift logic that prevents starting in second gear, and an instrument cluster that shows running status and fault information.
Why operators keep choosing it
10 t capacity quoted at a 600 mm load centre
4,150 mm turning radius on a 2,800 mm wheelbase
2,245 mm width for gate and lane clearance
3 m lift on a low-profile two-stage mast
15 / 20 km/h travel speed for apron shuttles
Solid tyres and 250 mm ground clearance for quay and CFS floors
CE and ISO 9001 certified; special equipment manufacturing licence held
24-month warranty with free replacement parts during the term
Specification
Values are for the standard configuration of CPCD100.
Drawing key: L overall length, W overall width, H mast height, H1 overhead guard height, r turning radius, a/2 and b clearance figures. The final envelope is confirmed on the order drawing, because mast type, fork length and attachment each change it.
Colour, customization & support
Built to your specification
Red, green or custom colour
Forks 1,220 / 1,370 / 1,520 / 1,670 / 1,820 mm
Mast: 2-stage duplex 3 m standard; full-free duplex and triplex on request
Attachment: fork positioner, side shifter, combined positioner + side shift, rotator, clamps
Tyres: solid standard, pneumatic and non-marking on request
Cab, heater, air conditioner, high-level exhaust, suspension seat and camera
OEM branding and packaging available
What comes with the machine
24-month warranty, replacement parts free of charge during the term
Reply within 24 hours, technical support 7x24
Full spare-parts line held for the whole range
Engineers travel to your market for commissioning and operator training
Pre-sales configuration design, in-sales order tracking and logistics
FOB or CIF terms; T/T, letter of credit or online bank payment
Specifications are for reference and may be revised without notice; confirm the final configuration on your order.
